-40%
SNAP ON MG1200 OR MG1250 TUNE UP KIT WITH BEARINGS FOR 3/4
SNAP ON MG1200 OR MG1250 TUNE UP KIT WITH BEARINGS FOR 3/4
SNAP ON MG1200 OR MG1250 TUNE UP KIT WITH BEARINGS FOR 3/4
SNAP ON MG1200 OR MG1250 TUNE UP KIT WITH BEARINGS FOR 3/4
SNAP ON MG1200 OR MG1250 TUNE UP KIT WITH BEARINGS FOR 3/4

SNAP ON MG1200 OR MG1250 TUNE UP KIT WITH BEARINGS FOR 3/4" DRIVE MODELS

$ 33.52

Availability: 131 in stock
  • Non-Domestic Product: No
  • Returns Accepted: ReturnsNotAccepted
  • Brand: Snap-on
  • Manufacturer Part Number: MG1200, MG1250
  • Warranty: No
  • Modification Description: I supply sets of o'rings for the reverse valve spool and the new sized rear rotor bearing to fit the OEM updated shaft size.
  • Modified Item: Yes
  • California Prop 65 Warning: N/A
  • Bundle Description: Snap on never offered any tune up kits or bundled repair kits. They have a tool exchange program or a confiscatory one-time charge for a tool to be sent to the Snap on Service Center only.
  • Condition: New parts comprise this custom and unique kit for either MG1200 or MG1250 models.
  • Custom Bundle: Yes
  • Type: Air Tool Parts
  • Country/Region of Manufacture: United States
  • Bundle Listing: Yes

    Description

    This ebay Buy-It-Now offering provides all the above shown parts to tune up and field repair your Snap on MG1200 or MG1250 3/4" drive impact wrench. I listed the parts that are shown on the Snap on Parts Supplement dated October 11, 2013 and January 3, 2013.  You cannot buy this kit from Snap on and you cannot find somebody else on the internet offering this kit. It is unique and custom designed by me so that all those ebay copycat chihauhuas who are nipping at my heels to compete with me for your dollar cannot do so on this item.
    Provided in this lot are as shown above and stated below:
    ME7A136............as the 3/4" drive anvil socket retaining ring. AKA #2A.
    ME7B44..............as the o'ring provided for a tight anvil retaining ring grip. AKA #2B.
    MG1200-3...........as the rear cover gasket.  AKA #13.
    MG1200-7...........as the o'ring for back end seal on the reverse valve. AKA #6D.
    MG1200-8...........as the air inlet bushing o'ring seal. AKA #1F.
    MG1200-15.........as the throttle valve seat (Plastic). AKA #1H.
    MG1200-16.........as the throttle valve bushing. AKA #1J.
    MG1200-18.........as the throttle / trigger valve. AKA #1K.
    MG1200-19.........as throttle valve spring, aka trigger compression spring.  AKA #1L.
    MG1200-21.........as front end plate body o'ring seal. AKA #7C.
    MG1200-22.........as the rear rotor support bearing. AKA #11.
    *There is a variation of this bearing that is not mentioned as a new part number by Snap on in their prints. The rear rotor shaft bearing journal diameter diameter was increased due to rotor shaft fracturing. Not shown in the above photo is the extra bearing I now include to cover that application.
    MG1200-25.........as the front oil seal. AKA #1A.
    MG1200-32.........as the front rotor support bearing. AKA #7A.
    MG1200-33.........as the air motor oil seal.
    AKA #7B. Snap on wrongly labeled an o'ring.
    MG1200-34.........as reverse lever detent ball. AKA #14A.
    MG1200-35.........as reverse lever detent ball spring. AKA #14B.
    MG1200-37.........as front reverse valve o'ring. AKA #6A. 1 OEM spec,1 sized
    extra
    o'ring.
    MG1200-38.........as rear reverse valve o'ring. AKA #6C. 1 OEM spec,1 sized
    extra
    o'ring.
    MG1200-530-6V..as the 6 vane set for this tool. AKA #8.
    The shipping weight is 6 ounces USPS first class mail with an ebay label and tracking.
    International buyers have this item shipped to Kentucky for additional processing costs through the ebay global shipping program.